Test Lead Kit - 6 in 1 Pack Overview: This kit comes with 6 different testing devices in one bag. With this kit in hand, hobbyists can do all kinds of testing on their electronic projects. Each device is made of quality material. Trouble free!...... Please get registered for product detail and price chart

ZIF Socket 40-Pin 0.6 inch Overview: This is a high-quality, easy to use 40 pin ZIF socket that is 0.6 inch wide with gold-plated contacts. Compatible with 0.3 up to 0.6 inch wide ICs up to 40-pins. Makes for easy connecting or programming to many DIP ICs. High conductivity terminals cr...... Please get registered for product detail and price chart

Low Current Test Leads with Aligator Clips on Both Ends Overview: This type of test leads with aligator clamps on both ends are for low current test or signal test. End users should be aware of the electricity during testing since the clamps are not fully insulated. The cable in use is by AWG24. It is good for test...... Please get registered for product detail and price chart

Low Current Test lead with Micro Banana Plug and U-shape Connector Overview: This low current test lead is made with micro banana plug by 4mm in diamter and U-shape connector with open width by 6mm. The connectors are not fully insulated and end users should be aware of this during the test. It can be used for signal test. It...... Please get registered for product detail and price chart

In-line Pin-plug - OD: 1mm / 2mm Overview: As also being called pin jack, this pin plug designs resemble banana plugs, but without the spring on the male pin. It is not so often available in the market. It is supplied to hobbyists for special need in the electronic projects....... Please get registered for product detail and price chart

ZIF Socket 28-Pin 0.3 Inch Overview: This is a high-quality, easy to use 28 pin ZIF socket that is 0.3 inch wide. Makes for easy connecting or programming to DIP ICs. Uses high conductivity terminals create solid connections. Can also be used for smaller pin packages....... Please get registered for product detail and price chart

Test Leads with U-shape Connectors on Both Ends Overview: This test lead is made with U-shape connectors on both ends. It can be used for signal test or power supply connection. It is suggested to use DC power under 7 amp if for power connection. The end users should be aware of the electric shock during op...... Please get registered for product detail and price chart

Stackable In-line Pin-plug - OD: 2mm Overview: This inline pin plug is stackable with another plug at its back. A closely related banana plug but different design is the so-called pin plug and matching pin jack. The pin plug designs resemble banana plugs, but without the spring on the male pin. I...... Please get registered for product detail and price chart

Test Lead with USB 2.0 with Aligator Clamps Overview: This test lead is made with a standard USB 2.0 at one end and 2 aligator clamps on the other end. It can be used for regular signal test or DC-DC power supply or charging. It is safe to use by the end users due to the full insulation. ...... Please get registered for product detail and price chart

Standard Banana Plug - OD: 2mm Overview: This type of banana plug is made of brass and gold-plated. It is a very common one that is used for most test leads with banana plugs. Cheap but great quality. ...... Please get registered for product detail and price chart

Test Lead with female USB 2.0 and Aligator Clamps Overview: This test lead is made with one fully shrouded female USB 2.0 plug and two medium size aligator clamps. It can work on testing under the current as high as 30A. The cable is made with 17 strands for high resistance. It is normally for professional us...... Please get registered for product detail and price chart

In-line Banana Plug - OD: 2mm Overview: Banana plug, also known as banana connector, is a single wire electrical connector used for joining wires to equipment. The plug is typically a four-leafed spring tip that fits snugly into the jack. The plugs are frequently used to terminate patch co...... Please get registered for product detail and price chart

2mm Banana Plug with Aligator Clip on One End Overview: This test lead is made with 1 banana plug on one end and an aligator clamp on the other end. It is commonly used for either DC power supply or regular testing by having the banana plug inserted into a standard multimeter and the aligator clamp connec...... Please get registered for product detail and price chart

Stackable Banana Plug - OD: 2mm Overview: These banana plugs are stackable at the rear end with a hole drilled in transversely to accept another plug. Hobbyists always use them to make a test lead by themselves whenever needed....... Please get registered for product detail and price chart

Dual Banana Plug with molded ridge - OD: 2mm EXT 2mm Overview: Dual banana plugs are often made in black color with some physical feature such as a molded ridge or thick tab, marked "Gnd" indicating the relative polarity of the two plugs. This type of plug is for making a special test lead by hobbyists or served...... Please get registered for product detail and price chart

Individual Banana Plug-adaptable / Adaptable - OD: 2mm EXT 4mm Overview: This type of banana plug is stackable and can also be served as a adaptor by another plug for extention. Hobbyists can use it to create a test lead or in their electronic projects or as the plug on the cables connecting the amplifier to the loudspeak...... Please get registered for product detail and price chart

Test Lead with Female DC plug and Aligator Plugs Overview: This test lead is made with a female DC plug by 5.5 x 2.1mm and two medium size aligator clamps. It can be served for signal testing or power supply connection. By common sense, the aligator clamp in red color should always gets connected with possit...... Please get registered for product detail and price chart

Test Lead with Male DC plug and Aligator Plugs Overview: This test lead is made with a male DC plug by 5.5 x 2.1mm and two medium size aligator clamps. It can be served for signal testing or power supply connection. By common sense, the aligator clamp in red color should always gets connected with possitiv...... Please get registered for product detail and price chart

Test Lead with RJ11 Plug and Aligator Clamps Overview: This is a special test lead made with standard RJ-11 plugs and medium size aligator clamps connected with standard telephone cable. RJ-11 plug is a world standard phone plug. This lead can do the testing on voice moudel that uses 6P2C connector socke...... Please get registered for product detail and price chart

Test Leads with Aligator Clamps on Both Ends Overview: This test lead is made with aligator clamps on both ends. The parallel cable in use is by AWG 20. It fits almost all kinds of testing on either signal transmiting or serving as power supply connection. ...... Please get registered for product detail and price chart